| | | | Mailing List Ricevi le novità hardware e software, i trucchi e download più recenti, direttamente nella tua casella email, ‹Iscriviti qui!› | | | | |
| | | | 
Data/Ora Server 07-Sep-2008 21:54:47 (GMT +0200) | | | | |
| |
Categoria: Principale/Elettronica/Raccolta Datasheet Ordina per: Titolo (A\D) Data (A\D) Giudizio (A\D) Popolarità (A\D) Risorse correntemente ordinate per: Date (Nuovi Prima)| Data Inserimento 25-Mar-2005 |
 117 downloads |  0 bytes |  Vota Download |  Download Errato |  Dettagli
|
Descrizione The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature. The LM35 thus has an advantage over linear temperature sensors calibrated in ° Kelvin, as the user is not required to subtract a large constant voltage from its output to obtain convenient Centigrade scaling. The LM35 does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full -55 to +150°C temperature range. Low cost is assured by trimming and calibration at the wafer level. The LM35's low output impedance, linear output, and precise inherent calibration make interfacing to readout or control circuitry especially easy. It can be used with single power supplies, or with plus and minus supplies. As it draws only 60 µA from its supply, it has very low self-heating, less than 0.1°C in still air. The LM35 is rated to operate over a -55° to +150°C temperature range, while the LM35C is rated for a -40° to +110°C range (-10° with improved accuracy).

| Data Inserimento 25-Mar-2005 |
 79 downloads |  0 bytes |  Vota Download |  Download Errato |  Dettagli
|
Descrizione The DS1923 temperature/humidity logger iButton is a rugged, self-sufficient system that measures temperature and/or humidity and records the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings taken at equidistant intervals ranging from 1s to 273hrs can be stored. In addition to this, there are 512 bytes of SRAM for storing application-specific information and 64 bytes for calibration data. A mission to collect data can be programmed to begin immediately, or after a userdefined delay or after a temperature alarm. Access to the memory and control functions can be passwordprotected. The DS1923 is configured and communicates with a host-computing device through the serial 1-Wire protocol, which requires only a single data lead and a ground return. Every DS1923 is factory-lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel package is highly resistant to environmental hazards such as dirt, moisture, and shock. Accessories permit the DS1923 to be mounted on almost any object, including containers, pallets and bags.

| Data Inserimento 25-Mar-2005 |
 74 downloads |  0 bytes |  Vota Download |  Download Errato |  Dettagli
|
Descrizione The DS1920 provides direct-to-digital 9-bit temperature readings over a range of -55°C to +100°C in 0.5° increments. The iButton® communicates with a processor using the 1-Wire® protocol through a hardware port interface. The port interface provides both the physical link and handles the communication protocols that enable the processor to access iButton resources with simple commands. Two bytes of EEPROM can be used either to set alarm triggers or for storing user data.

| Data Inserimento 25-Mar-2005 |
 78 downloads |  0 bytes |  Vota Download |  Download Errato |  Dettagli
|
Descrizione The DS1631, DS1631A, and DS1731 digital thermometers provide 9, 10, 11, or 12-bit temperature readings over a -55°C to +125°C range. The DS1631 and DS1631A thermometer accuracy is ±0.5°C from 0°C to +70°C with 3.0V

| Data Inserimento 25-Mar-2005 |
 83 downloads |  0 bytes |  Vota Download |  Download Errato |  Dettagli
|
Descrizione The AD22151G is a linear magnetic field transducer. The sensor output is a voltage proportional to a magnetic field applied perpendicularly to the package top surface.

| Data Inserimento 25-Mar-2005 |
|
|
|